Capabilities & Standard Mill Shapes
Call us today for a free quote at
866-252-4628
How much do I need to order?
| |
Albina Pipe Bending Capacities |
|
|
|
Wide Flange
|
Easy Way
|
S3/W4 THROUGH W33 X 241#, W36 X 210#, AND W40 X 183#
|
|
Hard Way
|
S3/W4 THROUGH W36 X 230#
|
| Channel |
Easy Way |
All Produced Sizes |
| Hard Way |
All Produced Sizes |
| Square HSS |
|
16 X 16 X .625 (Maximum mill produced size - Bending Capacity is greater) |
| Rectangular HSS |
Easy Way |
20 X 12 X .625 (Maximum mill produced size - Bending Capacity is greater) |
| Hard Way |
20 X 12 X .625 (Maximum mill produced size - Bending Capacity is greater) |
| Pipe / Round HSS |
|
3/16" OD Through 28" OD By Roll / Cold Bending Process |
| |
6" OD Through 28" OD By Hot Bending Process |
| |
1/2" OD Through 6" Pipe (SCH80) By Rotary Draw / Mandrel Process |
| Flat Bar |
Easy Way |
Any thickness and size through 4" x 22" (section is dependent on thickness to width) |
| Hard Way |
Any thickness and size through 2 1/2" x 16" (section is dependent on thickness to width) |
| Angle |
Leg In / Leg Out |
All sizes through 8 x 8 x 1 1/4 |
| Tee |
Stem In / Stem Out |
All sizes through 12" stems (weight per foot maximums would need to be calculated based on wf origin) |
| Plate |
|
3/4" Thick X 10' Wide (pre-bend up to 5/8" Thick) |
|
In addition to the most common forms of structural steel, Albina Pipe Bending also bends other miscellaneous material types, like architectural rail cap, railroad iron, rounds bars, square bars, etc. In addition to standard bend profiles, Albina is able to Sprial/Helix Bend, Compound Bend (Multiple Plane), Off-Axis Bend, and Elliptical/Parabolic Bend, etc.