Tech Tool Box
How to Order
Produce to Customer Specifications
Ability to produce from customer supplied samples, drawings, fixtures or templates.
How to Order:
- Specify tolerances to be held on part shape
- Send drawings or print samples, if available
Specify:
Material, including alloy or temper
Outside diameter (OD) and wall thickness (WT)
Centerline radius (CLR)
Minimum straight bend between tangent points (ST)
Maximum bend angle (BA)
Formula to determine material required:
Degree of bend x radius of bend x .01745 + all straight material
Example:
90 degree bend, 6" radius, with 12" tangent on each end,
90 x 6 x .01745 = 9.423" + 24" = 33.423" total material length
*Distortion estimates and samples provided upon request to eliminate any uncertainty.
