Photo Gallery
- WeeBee's Restaurant in Montana 12" OD x .250" wall bent on an ellipse W12 x 22# bent the hard-way to a 23 ft radius All architecturally exposed.
- 14" Sch80 pipe on an elliptical curve (ranging from 8' 0" radius to a 20' 0" radius). End of the Oregon Trial Museum Located in Oregon City, Oregon
- Beam offsets
- S 8 x 23# (I-beam)
- W8 x 18# rolled offset with 4ft radius
- I-Beam S12 x 50# bent the easy way to a 5' 0" radius on a 2' 0" offset
- TS 12" x 6" x .500"and TS 12" x 6" c .250" wall bent hot Multi-plane bending and all AWS D1.1 Fabrication
- 10" Sch40 pipe offset
- off-axis bend of TS 4" x 4" x .500" wall bent to an approx. 5'10" radius
- TS 8" x 6" x .375" wall bent the hard-way as a double offset (11'4" and 8'8" radii)
- 6" Sch80 pipe rolled into a "pringle shape"
- Pipe offsets
- 2" Sch40 18" to 24" offsets bent by Albina Pipe
- 6" Sch40 Blk and 6" Sch40 T304 S/S bent to a 36" CLR
- Complex Pipe Bend
- Custom Coil
- 3/8" OD x .049" wall 304 Stainless Steel 2-3/4" c-c loops x 10-1/2" tall
- Spiral rail bent out of 1½" Sch40 and 1/2" solid round. Spiral bent to a 21" plan view diameter
- Customer coils with terminals bent out of 3/4" OD x .059" wall material
- TS 2" x 2" x .250" wall Complicated offsets bent to various radii
